Solenoids

Electromagnets

Electronics

Electric Cylinders

Magnets

Wire

Tubing

Springs

Search

and or

only one keyword search term per box

 

Categories

Home

Solenoid Driver PWM Module
item #: ELSOPWM400



Availability:   in stock - available for immediate shipment


Unit Price:   
1-4 pieces: $144.86   
5-9 pieces: $127.07   
10-24 pieces: $113.32   
25-49 pieces: $102.20   
50-99 pieces: $92.84   
Prices for larger quantities may be obtained by contacting us or by clicking the RFQ below.  
OEM quantities, more than 100 units or special instructions:
  

Special Comments
   


Quantity adjustment on next page

The Module is designed to enable the user to convert the input voltage in order to apply a different voltage to the solenoid or coil.

The output voltage to the coil can be varied to within 5% to 85% of the input voltage by adjusting an on board trim potentiometer.

The voltage within the above range can then be applied to the coil when a voltage (2 to 40 VDC) is applied to the trigger.

This is particularly useful when a solenoid requiring a relatively large amount of power needs to be turned on and off with a low power trigger voltage such as a TTL compatible signal.


Parameter Min Typical Max Units
Supply Input Voltage
8
 
40
VDC
Continuous Power  
35
W
RMS Current  
3
A
Command (Trigger) Range
2
 
40
VDC
Command Input Resistance
50
  
KOhms
Operating Temperature
0
 
80
Deg C
Storage Temperature
-40
 
125
Deg C
PWM Frequency 
20
 
KHz
Output to Input Voltage Ratio
5
 
85
%




Quantity adjustment on next page


Copyright © PlanetEngineers.com